Energy paint - is the modern multi-functional composite materials consisting of a polymeric binder and filler - hollow microspheres. For the first time such a product was created by American scientists in the early 80-ies to deal with two opposing goals: reducing the amount of heat given building, and reducing the amount of solar energy which falls inside the premises and technological facilities. Our company has relied on experimental and theoretical data, proving the property of microspheres reflect and dissipate a significant part of the energy spectrum. This is confirmed by the works of scientists of the Institute of Heat and Mass Transfer Institute. AV Lykov. It was found that due to the suppression of data covering the radiation component of heat loss of reduction can reach more than 50%.

The hollow microspheres are finely dispersed legkosypuchie powders, consisting of thin (0,5-2,0 mm) glass spherical particles with a diameter of 10 ... 200 mm and low bulk density - 0.2 g/cm3. The final properties of the material in which the microspheres are used as filler, determine the diameter of microspheres, their size distribution, wall thickness and the number of microspheres in the final composition. With its unique combination of spherical shape, controlled size, low density, relatively high strength hydrostatic compression, good heat and sound insulating and dielectric properties of the microspheres are one of the most important man-made fillers of polymeric materials.

In today's rapidly evolving industrial world new developments are important because they allow to improve the usual methods and open new quality of used energy-saving coatings.

Keeping pace with the times, Ltd. Company Ever "has developed and put into production a unique energy-saving cover under the trademark" Moutrical ", which reflects recent advances in teplosberezheniya, including those related to nanotechnology. This is confirmed by the decision to grant a patent from 11.06.2008 year. Coverage «Moutrical» contains aerogels "Nanogel", referring to the class of mesoporous materials in which the cavity occupied by at least 50% of the volume. Share cavities (their size from 2 to 50 nm) in the total may reach 90-99%. Aerogels are characterized by the highest levels of strength per unit mass. In addition, it is the best electricity, heat and sound insulator.

After drying and curing of paint film is formed with thickness of 0,5 mm. Inside it, as well as on its surface are the physical processes that lead to a reduction in the amount of heat given out by the building of 30-40%.

It is well known that heat from the surface of the wall goes in two ways: first, due to convective heat transfer, heating the surrounding air layer, and, secondly, due to radiation when the surface radiates energy toward a cold body. According to experts it is the radiation largely determines the thermal regime of the building. Thus, for a detached building to 93% of heat loss through the roof and up to 75% of heat through the wall occurs due to thermal radiation. All traditional insulation materials work on the basis of preserving heat due to air contained in the pores of the material. However, these materials are useless in the transfer of heat by radiation. Air - a good heat insulator in slowing heat transfer by conduction, but it can not prevent the transfer of heat by radiation.

The amount of heat emitted by the surface of the wall depends mainly on two factors: the degree of blackness of the surface material and from where in the building is situated. The emissivity energy efficient coatings less than brick or concrete, respectively, the surface covered with the paint, emits less heat. The film, which forms a coating when dry, acts as a kind of "heat mirror", reflecting and scattering of the heat flux. The flow reaches the outer surface of the wall, partially returned, while increasing the temperature of the inner surface of the wall.

Coverage Moutrical has the property of reducing the radiation component of heat flux from its surface due to high reflectivity and dispersion of heat flux.
Thus, in the coating Moutrical minimize all three mechanisms of heat transfer in the material, which has resulted in a lower thermal conductivity than air. But this - the effective thermal conductivity, which reflects all the mechanisms of heat transfer.

Use energy-efficient coatings for thermal readjustment enclosing structures of buildings and structures would reduce the heat loss from the surface of frame structures and, consequently, energy consumption required to maintain regulatory temperature.

Another promising area of coverage "Moutrical" is its application to the surface of vessels and tanks with volatile substances (petroleum, chemicals, refrigerants).

OOO Company "Ever" is constantly expanding list of products. So in 2007, it became Company "Ever has developed a flame retardant intumescent paint« Moutrical-F »is designed to reduce the flammability and fire resistance of materials and structures in buildings and structures for various purposes, and water-repellent agent« Aquafob-M », which is designed to make water-repellent properties of building materials .

Fire-retardant intumescent paint «Moutrical-F» represents the aqueous dispersion based on acrylic film-forming with the addition of fillers and flame retardants.

At the same time swelling and charring occurs on the formation of small-meshed structure of the layer (penokoksa), has low thermal conductivity, thereby dramatically slowing down the heating of metal structures. It also highlighted the various gases or vapors of water.

Due to this surface structure is cooled.

Water-repellent agent «Aquafob-M» represents a water emulsion of silicone copolymers. Designed to give water-repellent properties of dense and porous concrete, brick, natural and artificial stone (limestone, granite), mineral plaster and other porous surfaces, including highly alkaline.

The main objective of our company - quickly and efficiently provide our customers with the necessary material. With minimal cost and, if necessary, to ensure timely delivery to anywhere in Russia.

We are focused on the full cycle of customer service - from initial consultations to the detailed calculation of needs, the final delivery of the goods and perform all work necessary for the deposition of the material.

Our professionalism and expertise ensures consistently high quality products!

We are always ready for mutually beneficial cooperation and focus on productive work with clients!